Skip to main content

Comfort Height Toilet

Two to four inches taller than a standard toilet. It is the permanent version of a raised seat, and nothing on it can come loose.

We may earn a commission if you buy through links on this page, at no extra cost to you. It never changes what we recommend.

The short answer

A standard toilet sits about 15 inches high. A comfort height one sits about 17 to 19 inches, which is close to chair height. Less distance to lower into, less to push up from. It costs $250 to $700 fitted. A raised seat gets you the same height for about $40, but it sits on top and can shift. Pick the toilet if this is your home and the change is permanent. Pick the seat if you rent, or you need it this week.

Comfort height toilet or a raised seat?

Standard toilet, comfort height toilet and raised seat compared
 Standard toiletComfort heightRaised seat
Seat height14 to 15 in17 to 19 inAdd 2 to 5 in on top of whatever you have
Fittingn/aPlumbing jobSits on the bowl, no tools
Costn/a$250 to $700 fitted$25 to $60
Can it shift?NoNoYes, if a clamp loosens
Looks likeA toiletA toiletAn add-on
Good for renting?n/aNoYes

Costs are planning ranges from published retail and contractor pricing as of August 2026. Your own quote depends on what the plumber finds under the old toilet.

Measure the person, not just the toilet

Taller is not automatically better. Feet need to reach the floor. Flat feet give balance while sitting down and while standing up, and they matter for using the toilet properly.

  • Sit them in a dining chair. If their feet sit flat and their knees are level with their hips, chair height suits them. That is what comfort height copies.

  • Watch the feet dangle. If the heels lift off the floor in that chair, a taller toilet will make things worse, not better.

  • Under about five foot two? Measure first. A standard height with a small footstool often works better than a taller bowl.

  • Using a wheelchair? Match the toilet height to the chair seat. A level transfer is easier and safer than an uphill one.

The part you can buy today

If you are not ready to change the toilet, these make the room safer now. The tape measure is also how you check the seat height you actually need.

  • Stanley PowerLock 25 ft Tape Measure

    Stanley PowerLock 25 ft Tape Measure

    25 ft, 1 in blade

    Measures the rise, the doorway and the run. Every quote asks for these numbers.

    Check price on Amazon
  • Franklin Sensors ProSensor Stud Finder

    Franklin Sensors ProSensor Stud Finder

    9 sensors, shows full stud width

    Shows where the wood is behind the wall. A grab bar has to land on it.

    Check price on Amazon
  • OTHWAY Non-Slip Bath Tub Mat

    OTHWAY Non-Slip Bath Tub Mat

    198 suction cups, 360 drain holes

    Grips the tub floor so it does not slide. Water drains through it.

    Check price on Amazon
  • Moen Handshower with 24 in Slide Bar

    Moen Handshower with 24 in Slide Bar

    24 in slide bar, 69 in hose

    A shower head you hold, on a bar you can move. Works sitting down.

    Check price on Amazon

These are supplies, not the job itself. Amazon does not sell the labour, the permit or the inspection.

Common questions

What is a comfort height toilet?
It is a toilet with a taller bowl. A standard one sits about 14 to 15 inches from the floor to the top of the seat. A comfort height one sits about 17 to 19 inches. That is roughly chair height, which is where the name chair height comes from too.
Is a comfort height toilet better than a raised toilet seat?
It does the same job and does it permanently. A raised seat adds height but sits on top, so it can shift if a clamp works loose. A comfort height toilet cannot shift because it is the toilet. The trade-off is that it is a plumbing job rather than a purchase, and you cannot take it with you.
Who should not get a comfort height toilet?
Anyone short enough that their feet would not reach the floor. Feet flat on the floor matters for balance and for using the toilet properly. If someone is under about five foot two, measure before you buy. A standard height with a small step may suit them better.
How much does a comfort height toilet cost?
The toilet itself runs about $150 to $400. Fitting adds roughly $150 to $350 depending on where you are and whether the old one comes out cleanly. Budget $250 to $700 all in. If the flange or the floor under the old toilet is damaged, it costs more, and you will not know until it comes out.
Can I fit a comfort height toilet myself?
If you have swapped a toilet before, yes. It is the same job as any toilet swap. The parts that catch people are the wax ring seal and the condition of the flange underneath. Get either wrong and you get a slow leak into the floor that you will not see for months.
Is comfort height the same as ADA height?
They overlap but they are not the same thing. The ADA reference figure for a toilet in a public building is 17 to 19 inches to the top of the seat, and most comfort height toilets land in that band. The ADA governs public buildings, not private homes, so in a house this is a useful benchmark rather than a rule.

Related